Product property: It is used to terminate 2-core or 4-core of aerial bundle conductor. Its function is fixing and tightening the insulation conductor.
Applicable voltage: 1kV and below
Tension Clamp
Enquiry about Tension Clamp
Enter the security code shown above
Description
The bundled tension clamp is suitable for the ends or both ends of the tension section of bundled conductor for 1KV and below overhead power lines, to fix or tighten the insulated wires. The wire clamp adopts a four-core (two-core) and groove structure. After the wire is clamped (without removing the insulation layer), tighten the bolt, and the clamped wire can be bundled. After the pull ring is anchored, it can be tightened and fixed to get a greater grasp.
| Model | Application conductor (mm2) | Description |
| NXJ2-1A | 2x(16-50) | Trolley type, aluminum alloy body |
| NXJ2-2A | 2x(70-120) | |
| NXJ4-1A、1C | 4x(16-50) | |
| NXJ4-2A、2C | 4x(70-120) | |
| NXJ4-1B | 4x(35-50) | Pull plate, the body is weather resistant engineering plastics |
| NXJ4-2B | 4x(70-95) | |
| NXJ4-3B | 4x(50-120) |
